Emmegi Nanomatic  384 S

The work cycle is managed by intuitive software which guides the operator through simple instructions on the touch screen display. The USB connection allows easy connection to the PC. The 4-faced rotary work table allows increasing working speed and precision. It also allows using shorter tools thus limiting to a minimum passing machining which causes vibrations and noise. Quick tool change ISO 30. Work area with pneumatic control protection.

Workpiece rotation
Via the release control on the console, the slewing ring with rotary movement can be moved manually and blocked in 4 preset positions by pneumatic stops, for processing to be performed on the other sides of the profile.

Workpiece rotation
Via the release control on the console, the slewing ring with rotary movement can be moved manually and blocked in 4 preset positions by pneumatic stops, for processing to be performed on the other sides of the profile.

Control joystick
The lever allows performing the vertical movement of the milling unit. A motor starter button is found on the joystick. The electrospindle has a tool holder with an ISO 30 quick coupling; there are 4 housings on the sides of the machine for 4 toolholders.

Stop devices and roller conveyors

The roller conveyors positioned on the right and left support the machining of the very long profiles. Moreover, a system of manually-regulated stop devices, also on the right and left, allows positioning the workpiece in the machine correctly, taking it to the work area.

Numerical control
The interface with 5.7" touch screen display replaces the template and allows defining the figures to be realised and their positioning on the workpiece, therefore indicating the position of the relative stop device. The operator instructions are given in real time with signals and messages on the display, making the job simple and intuitive. The milling movements referring to the X and Y axes are managed electronically by the controlled interpolated axes. The descent movement of the spindle, like the rotation of the workpiece, takes place manually. This machine features a USB port to make data transfer easier.

Vices
The machine has pneumatically-controlled horizontal and vertical vices with low pressure device and can be regulated manually, which assure the correct blocking of the profile in the machine.

CHARACTERISTICS 
Motor with inverter (kW)
1,1
Tool speed (rpm)
1.000 ÷ 8.300
Travel (X-Y-Z) (mm)
380 – 150 – 250
Numerical control axes (X, Y)
2
Manual head lowering with a pneumatic blocking system
Vices capacity at 90° (mm)
140 x 120
Rapid tool change
ISO 30
Max. tool diameter (mm)
10
Max. tool length (mm)
95
Horizontal vices with dual hold-down and low pressure device
2
Vertical vices with low pressure device
2
Pair of vertical vices with low pressure device on side brackets
 
PVC adjustable vice jaws
 
One tooth end-mill (mm)
Ø = 5 - 10
Mill-holder collet complete with lock-nut (mm)
Ø = 5/6 – 9/10
Micro-mist lubrication system with water and oil emulsion
 
Injection lubrication system
 
Air cooling system –20° and injection lubrication with 1 nozzle for machining on stainless steel
 
Laser pointer
 
Right and Left profile-supporting shelves with 4 excludable stops
 
Central stop that slides along linear guides
 
Tool holder storage built into the base, holds 4 tools
 
Head movement along precision linear guides
 
Windows CE operating system
 
Standard macro figures execution software
 
5.7’’ touch screen colour LCD