FLARING Aluminum MIG Welder Machine FM-200
This FLARING welder offers both MIG and TIG welding. Its MIG mode includes two types of MIG welding – gas welding (solid wire) and gasless welding (flux core). You also get stick and lift-TIG welding capabilities. You will have to carry the gas with you if you’re doing gas welding, but it gives a better effect. If you’re doing a job that means carrying the gas with you is difficult, then you’re better off using flux core welding. This machine supports the use of a spool gun but it isn’t included in the package. For the lift-TIG mode, you will require pure argon gas and a TIG torch, which isn’t included in the package either.
It is a bit of a sore spot that this machine is advertised as an aluminum welder when you can’t weld aluminum without a torch, but it is lightweight, easy to use, good value for money, and great for beginners. It can accommodate wire spools over 11lbs, and adjust wire feeding speed (when using the MIG modes and spool guns), has automatic changing of voltage and wire feeding speed by adjusting amperage or choosing different wire thicknesses.
It’s good for pipe installments, mold repairs, petrochemicals, architectural decorations, bicycles, car repairs, handicrafts, and general manufacturing.
This machine features:
240 volts input voltage
21A input current
Waterproof, overvoltage, and overcurrent protection
Automatic overheating shutdown
5.2 ft power cord
MB15 MIG welding torch 10ft
300A Earth Clamp 6.5 ft
300A Electrode holder 6.5 ft
Flux Cored Wire 1.1lb
Welding Gas Hose 10 ft
User guide (English)
FLARING MIG Welder 200Amp 5 in 1 Gas MIG/Gasless Flux Core MIG/Stick/Lift TIG welding Spool Gun 220V 200V Aluminum Multi Process Welding Machine with Wire Feeding Adjustment 3-Year Warranty
[POWERFUL 5-IN-1 MIG WELDER] FM-200 provides two mig welding modes: gas welding(solid wire) and gasless welding(flux core). If you wish for a better welding effect, it is recommended to use gas mode; if you work outside and not easy to carry the gas, then flux core welding is the best idea(supports spool gun but it’s not included in the package) .Supports .030"-.035" wire with 2lb or 10lb flux core and solid wire to weld over .030"(0.8mm) thickness steels.
[MIG Manual & Synergistic setting ] You can manually adjust the welding current according to your welding habit for different diameter of welding wire and gas material , very suitable for professional welders. However, if you are a beginner, you just need to adjust the button to the same position, and you can also weld very well.
[STICK WELDER] If you want to repair fences or brackets with welding rods like 7018,6013,just select the MMA mode,Cellulose Rods are not supported.(①The welding rod specification is supported below 4.0(5/32in), but no cellulose electrodes.② It supports 1-8mm(1/64-5/64in) carbon steel and 1-5mm(1/64-7/32in) stainless steel. Aluminum can not be welded. For carbon steel, please use a carbon steel electrode. For stainless steel, please use stainless steel electrodes.)
[LIFT-TIG] welding thin plates with higher welding process requirements,especially for stainless steel welding, you can use the LIFT TIG mode(not high frequency tig), which requires pure argon(tig torch is not included).
[Warranty Assurance] We are a manufactory with over 10 years' experience of professionals producing the welder machines,2 year's warranty for this model.Please add to cart and take it without hesitation.We take care of our customer’s safety based on over current, over voltage, over current, over-load, overheating protection function.