Phantomatic  T3 A

Machining centre CNC with 3 controlled axes, used for the working of bars or aluminium, PVC, light alloys in general and steel pieces up to 3 mm. Automatically positioned clamp unit. It has a 4 or an 8 place (optional) tools storage, with the possibility of hosting 2 angular units and one milling disc, to perform machining on the 5 sides of the piece. It also has a mobile work surface that facilitates the piece loading/ unloading operation and signifi cantly increases the workable section.

Heads lubrication
An adapter flange with quick couplings is provided on the electrospindle to accommodate the angle aggregate lubrication system, ensuring proper lubrication of the tools being machined.

Electrospindle - T -
The high-torque 5.5 kW electrospindle in S1, which is available on request with 7.5 kW power in S1, enables even heavy machining typical of the industrial sector. It can be used for some types of steel extrusions as well as for aluminium profiles, thanks to the software-adjusted lubricating system. With its double tank it allows either minimum oil circulation or oil emulsion spray-mist.

Tool magazine
The new toolholder magazine, which is circular in shape, makes it possible to reduce the footprint, to ensure the positioning of large extrusions on the machine and also to perform tool changes very quickly. The sheet metal protective cover offers optimum protection for the toolholder cones from swarf and accidental knocks. The magazine can contain up to 4 toolholders (8 upon request) with relevant tools, which can be set at the operator’s discretion.

Vices
The machine software can calculate the correct positioning measure for each vice unit, according to the length of the workpiece and to the type of machining to be performed. The automatic positioner allows picking all vice units and moving them by means of the gantry. This operation is performed at the highest speed and with great precision and spares longer time and collision risks, so that the machine can also be easily used by less experienced operators.

AXIS STROKES 
X AXIS (longitudinal) (mm)
4.300
Y AXIS (transversal) (mm)
270
Z AXIS (vertical) (mm)
300

ELECTROSPINDLE 
Maximum power in S1 (kW)
5,5
Maximum power in S1 (kW) (optional)
7,5
Maximum speed (rpm)
20.000
Toolholder cone
HSK - 63F

AUTOMATIC TOOL MAGAZINE 
Maximum number of magazine tools
4 standard ; 8 optional
Number of angle machining heads that can be inserted in the magazine
2
Maximum diameter of the blade that can be inserted in the magazine (mm)
Ø = 180

FUNCTIONS 
Multi-piece operation (only with two reference stops)
 
Extended machining, up to twice the maximum nominal length in X (only with two reference stops)
 
Basic multi-step machining - up to 5 steps
 
Automatic management of multi-step mode machining
 
Multi-piece mode machining in Y
 
Workpiece rotation for machining on 4 sides
 
WORKABLE SIDES 
With direct tool (upper side)
1
With angle machining head (side faces and heads)
2 + 2
With blade tool (side faces and heads)
2 + 2

TAPPING CAPACITY (with tap on aluminium and through hole) 
With compensator
M8
Stiff (optional, only with 7.5 kW electrospindle)
M10

PROFILE POSITIONING 
Workpiece reference LEFT stop with pneumatic movement
 
Workpiece reference RIGHT stop with pneumatic movement
 
WORKPIECE LOCKING 
Standard number of pneumatic vices
4
Maximum number of pneumatic vices
6
Automatic vice positioning through X axis